Whether rapeseed oil or sunflower oil, wood waste or sugar: polyols can also be produced from renewable raw materials. We do not use styrene or plasticizers in the formulation used. The new PU material not only meets all the requirements for the production of an extremely stable, robust and durable climbing hold, but also ensures a high degree of cost-effectiveness with cycle times of around ten minutes! Suitable for both hand and machine casting!
INVEST IN THE FUTURE!
duranity
Casting resin GM 1914
Highest abrasion resistance
Our tried-and-tested climbing grip casting resin from the very beginning, which impresses above all with its high abrasion resistance. It contains approx. 40 per cent raw materials from renewable sources, is plasticiser-free, impact-resistant and perfect for implementing your creative ideas.
duranity flex
Casting resin GM 2310
40 per cent raw materials from renewable sources
The further development of the classic duranity climbing grip casting resin. Its most important feature is its very high impact strength. duranity flex also contains approx. 40 per cent raw materials from renewable sources and otherwise has the same properties as duranity.
Are you unsure whether you should use duranity or duranity flex? Then read our blog post on this topic or get in touch with us. We will be happy to advise you personally.
Silicone 25
Silicone rubber for mouldmaking
Perfectly replicates your desired shape
In order for your holds to turn out the way you want them to, it's not just the moulding compound that is crucial. The mould is just as important, because the finished hold is only as good as the mould.
In our how-to videos you will find important information on making a silicone mould and tips on handling
Colour pastes
For a wide variety of colours
More fun when climbing
Our colour pastes are available in 18 different shades. They are optimally matched to the duranity casting resins and therefore cannot negatively affect the properties of the plastic. The pastes are economical and long-lasting - so that you and your customers can enjoy your climbing holds for a long time.
Watch the ‘How to colour the material’ how-to video to find out more about the use and properties of our colour pastes.
ebacoat
Epoxy resin
For coating and upcycling
ebacoat is a liquid epoxy resin that is used in various areas: as a coating for volumes and macros, as a wall coating or - in a slightly higher viscosity - for repairing handles to make them nice and grippy again. The resin can be mixed with colour pastes or sprinkled with sand or other granular material.
Additional accessories
Optional helpers
Support you
in the production of climbing holds
-
Rapid casting resin SG 241: Polyurethane resin for easy production of thermoforming moulds
-
rapid casting resin SG 2000: low-viscosity polyurethane for masters and displacers
-
Stirrer: For bubble-free mixing and stirring of the casting compounds
Any questions? Please feel free to contact us.
Our Know-How
Advice and support
You can count on our experience
Whether you have general questions about our products or are facing specific challenges in hold production - we won't leave you alone. We will be happy to advise you and provide you with specific assistance on the topics of mould construction, processing, machine casting and production optimisation.
Have you already seen our how-to videos? We cover many important topics in them. Do you have any further questions? Then simply send us an e-mail and we will get back to you.
FACTS
DURANITY IN NUMBERS
40%
renewable raw materials
80%
Material savings
27.3%
C-biobased/TC
72.7%
C-fossil/TC